CYPrefabWeifang CYPrefab Integrated Housing Co., Ltd.

Flat pack container units, quoted line by line

Site accommodation, offices, sanitation and storage units built on a container frame. Every quotation breaks the unit down to the last fastener, so you can compare offers knowing what is actually included.

40+components standard on every unit
60+line items per quotation
8structural systems, none optional
6,0552,8966,0552,990Floor areaThe footage shown is illustrative. Factory photography and real unit video are available on request.
Every quote comes with the full component list
Two stocked sizes, plus custom dimensions
Nothing bundled and hidden — you see what you pay for

Container units we build

All three share the same eight-system structure, so spare parts and installation stay consistent across an entire site.

5,9002,8965,9002,438Floor areaThe footage shown is illustrative. Factory photography and real unit video are available on request.

Flat Pack Container Unit — 5900 x 2438 x 2896 mm

Standard size, ships worldwide, fits into existing transport and crane plans

External size 5,900 × 2,438 × 2,896Floor area 14.38 m²
6,0552,8966,0552,990Floor areaThe footage shown is illustrative. Factory photography and real unit video are available on request.

Flat Pack Container Unit — 6055 x 2990 x 2896 mm (Wide Body)

The wide-body option — noticeably more floor area where bunk layouts and partitions matter

External size 6,055 × 2,990 × 2,896Floor area 18.1 m²
Made-to-Measure Flat Pack Container UnitThe footage shown is illustrative. Factory photography and real unit video are available on request.

Made-to-Measure Flat Pack Container Unit

Non-standard length, width or height — engineered against your drawing rather than forced into a stock size

External size —Floor area — m²

View all product lines

Specification

External dimensions in the assembled state. Measurements toggle between metric and imperial.

 FP-5900FP-6055WFP-CUSTOM
Length5,900 mm6,055 mm—
Width2,438 mm2,990 mm—
Height2,896 mm2,896 mm—
Floor area14.38 m²18.1 m²—
Units per 40HQ containerOn requestOn requestOn request
Steel thickness2.5 mm2.5 mm2.5 mm
Frame2.5 mm galvanized steel frame — top, bottom and reinforced corner posts2.5 mm galvanized steel frame — same structural system as the 5900 mm unit2.5 mm galvanized steel frame, engineered to your load case
Floor build-upCement fibre board substrate with 1.6 mm PVC floor coveringCement fibre board substrate with 1.6 mm PVC floor covering—
Insulation75 mm glass wool blanket75 mm glass wool blanket (standard underfloor option)—
Electrical packageDistribution box, switches, sockets, LED light, industrial plugSame electrics package as the 5900 mm unit—
Door & windowSteel door, sliding PVC windowSteel door, sliding PVC windowDoor and window positions to your drawing

Dimensions are nominal external measurements in the assembled state. Request the drawings before you set foundations.

Give us the required length, width, height and design load, and we will engineer the unit to them.

How the unit is built

Eight systems go into every unit — and this is exactly how your quotation is broken down.

Sandwich panel systemWall panels fitted across the full perimeter, specified on every configuration
Top frame2.5 mm beams and purlins joined with corner fittings
Bottom frame2.5 mm long and short beams with a formed water channel and moisture barrier
Corner post system2.5 mm posts with reinforcement for stacked loads
Trim and finishingInternal corners, skirting, butyl tape, sealants and edge covers
Hardware packageComplete fastener set: bolts, drill screws, gaskets and adhesives
Underfloor insulationInsulation wool with 75 mm glass wool blanket
Electrical fit-outDistribution board, cabling, switches, sockets, LED lighting and industrial plug

How we deliver

From your first inquiry to installation support — the same eight steps for a single unit or a full camp.

Inquiry & requirementsYou send dimensions, quantity, destination port and intended use — we confirm feasibility within one working day.
Design & engineeringLayout, structural calculation and general arrangement drawings prepared for your approval before any steel is cut.
QuotationA line-by-line quote: unit price, packing, loading and freight — no bundled numbers you cannot check.
ProductionProduction starts against the signed drawings, with progress photos at panel fabrication, assembly and finishing.
Quality inspectionIn-house inspection at every station; independent third-party inspection welcome at your cost before loading.
Packing & loadingFlat-pack kits loaded into 40HQ containers with documented loading photos and a packing list per unit.
Shipping & documentsBooking, bill of lading, certificate of origin and insurance arranged to your incoterm.
Installation supportAssembly manuals, remote guidance during first erection and a spare-parts list with every shipment.

Frequently asked questions

Type what you want to know, or open one of the common questions below.

Common questions

What sizes do you supply?

Two sizes are stocked — 5900 x 2438 mm and 6055 x 2990 mm, both at 2896 mm external height. Anything else we build to your dimensions.

What is the minimum order quantity?

Minimum quantity depends on the configuration and how it ships. Give us the project detail and we will give you the real number rather than a stock answer.

How long does production take?

Lead time depends on quantity and configuration. Send us those two numbers and we will commit to a date instead of quoting a vague range.

How are the units shipped?

They ship flat packed. Give us the destination port and we will confirm packing, quantity per container and loading along with the quotation.

Is the electrical installation included?

Yes. Distribution board, cabling, switches, sockets, LED lighting and an industrial plug are standard on every unit. Plumbing and sanitation layouts are built to order.

Do you hold test certificates or factory audit reports?

At present we hold none, and we will not claim otherwise. If your project requires certification, tell us which standard and we will answer honestly whether we can meet it.

Can you build to my drawing?

Yes. Length, width, height, door and window positions, insulation specification and internal partitions can all follow your drawing.

What do you need from me to quote?

Four things will get you a price fastest: intended use, quantity, required size or drawing, and destination port.

Are the units suitable for worker camps and site accommodation?

Yes — that is the core application. Units are supplied in accommodation, office, sanitation and storage configurations, with bunk layouts and partitions available on the wide-body and custom sizes.

Request a quotation

Four details are enough to start. We reply within one working day.

Nothing is uploaded to any server. Your details stay on your device until you press send.